Major International mining company approves Callidans MoistScan for use on conveyed copper

first_imgOnline moisture analysis specialists Callidan Instruments recently had its MoistScanr MA-500HD subjected to arduous testing by a large international mining company to prove its ability to meet minimum performance standards accuracy and reliability on copper ore. In this case, the primary reason for measuring moisture online is for metallurgical accounting. The MA-500HD was installed on the feed conveyor to the SAG mill where information from the MoistScan was combined with beltscale data to derive a dry tonnes per hour feed to the mill.The company had previously trialled near infrared moisture analysers (NIR); however this technology failed to meet the minimum performance. This consequently led to a decision by the company to test microwave technology. Proposals from three online microwave moisture analyser manufacturers were considered and after rigorous technical and economic evaluation the company chose the MoistScan MA-500HD. This unit, manufactured by Callidan Instruments, was chosen to be tested due to its past successes in ore applications throughout the world.Calibration of the analyser involved collecting a suite of samples from the belt and having these analysed in a laboratory for moisture. Sample results were compared with the raw microwave data from the MoistScan and a calibration was determined. To maximise accuracy all year round dual calibrations were developed, one for the wet season and the other for the dry season. The client can switch between calibrations depending on the level of moisture.The conclusions of the trial were:The calibration of MA-500HD was rigorous and effectiveThe equipment can be adapted to the climatic conditions prevalent at the plantThe HD is capable of achieving a relative accuracy of 8% of the laboratory reported moisture on copper ore feed to the SAG mill (e.g. if the lab moisture is 3% the MA-500HD will read ±0.24%)The manufacturer was very quick to solve problems and showed high technical knowledge about operation of equipment and the mineral beneficiation processTesting of this equipment was recommended in other units of the mine for similar applications.Endslast_img

Leave a Reply

Your email address will not be published. Required fields are marked *